software untuk mengakses internet , plasa hosting, vps gratis, vps murah terbaik

How to Keep Your Septic System in Good Working Order

How to Keep Your Septic System in Good Working Order

When you purchase a vehicle, you are provided with an owner’s handbook that contains maintenance instructions. No handbook is provided with the installation of certain septic systems that cost as much or more than the average automobile. When it comes to septic systems, some individuals don’t even realize they exist! Septic systems that fail due to a lack of maintenance are a common problem.

Failure has a high price.

Failure has a high monetary cost for both sides. Polluted water kills more than 1200 people a year, and failed septic systems are the major cause of waterborne illness epidemics. According to an EPA analysis from 2000, 31 states ranked septic systems as the second most likely cause of pollution in their groundwater supplies. Septic system replacement might cost anywhere from $5,000 to $20,000 or more, depending on the scope of the project. Some extremely effective yet ineffective procedures may be taken in order to resolve this issue. First, let’s take a look at the reasons septic systems fail.
Maintaining a septic system is really rather simple. It is not the tank that fails, but the drainfield soil. Most soil failures occur when it becomes clogged with solids and is unable to convey fluids. With sediments from the tank or with lint left over from washing machines, these are two examples of things that might cause it to get blocked. Let’s move on to the solutions:

The first step is to use a washer filter.

Septic system failure is a significant cause of washing machine malfunction. Washing machine lint is the leading cause of obstructions in drainage systems. You may not have known, but an average family washing machine creates enough lint each year to carpet an entire living room floor. Hardware store lint screens and nylon traps only catch 5% of these particles. The lint particles do not settle in the septic tank because they are so light and tiny. Instead, they remain suspended and are drained out to the drain field, where they clog the soil pores.
Synthetic fabrics like polyester and nylon are now used to make most of our clothes. In a septic system, these compounds are not biodegradable and will not degrade. Instead of dispersing, they build up and clog the soil. There is no way to remove these elements from the soil once they are there.
The good news is that a reusable inline filter attached to your washing machine discharge hose may keep lint out of your septic system. $139.95 is the cost of the Filtrol 160 filter.

Avoid Using Excessive Water

Doing a lot of washing in a short period of time might potentially harm your septic system. Solids collect in the tank of a traditional septic system, and the wastewater is discharged into the earth. To avoid flooding and flushing solids out of the tank, do not put more water than the system is designed to handle into your drain field (in fact, septic pumpers use water from their hoses to help break up solids in your tank before pumping them out). A normal washing machine uses 60 gallons of water for a single load of laundry. It’s easy to pump 400, 500, or 600 gallons of water through the system in a few hours on a busy day! Your water consumption should be spread out over a longer period of time. Instead of doing 10–12 loads of laundry on Saturday morning, do one or two loads a day. Water softeners may potentially harm your septic system by sending too much water through it. Every week, these devices flush down the drain water that is not polluted and does not need to be treated.
This issue has a few solutions. By replacing your current system with an energy-efficient one, you may save money on your utility bills by using less water and having your softener regenerate only when you need it. A water softener or mini-septic system is also an option.

Protect the tank by preventing solids from escaping.

To begin with, have your tank pumped on a regular basis to prevent sediment from building up too much. Under normal circumstances, you should have your storage tank examined and pumped once every one to three years. Pumping and inspecting tanks via the manhole cover rather than the inspection hose is critical. Your septic contractor should also install an effluent filter in the tank’s exit baffle. Filters prevent bigger particles from reaching the drainfield. It’s recommended to have your tank pumped at least once every few years to ensure that the sediment is removed. Most of the time, they cost little more than $80. A washing machine filter and an effluent filter are two of the best things you can do to keep your system safe.

Use of Cleaning Supplies in the Home

Septic system failure may be exacerbated by overuse of these products. If you use bleach in more than 5 loads per week, you may encounter issues.To avoid clogging your pipes and drain field, stay away from powdered detergents. Beware of aggressive automated toilet bowl cleaners, which have been known to break down many systems.

What About a Separate Washing Machine System?

Laundry interceptors, according to some, should be used in addition to your regular washing machine. However, this is not required and is really undesirable. Discharging into the regular system is preferable to the washing machine’s own system since it is more efficient. Septic systems need bacteria colonies that degrade biodegradable materials in order to function. They need “food,” which is present in our wastewater but not in detergent, for these microorganisms to thrive. Bacterial colonies die off and the system breaks down when they are deprived of “food.” A lot of folks who have installed these systems have discovered this the hard way. Many of the high-tech devices used in a research study in many east coast states to discharge washing machines failed after just eight months of use.

Assuming You Have a Failed System

It’s possible to save money by having your system tuned up rather than replacing it. Pumping the tank, cleaning the drainfield lines, and installing washer and effluent filters are all included in this tune-up. Some failing systems may be revived by fracturing the soil if the procedures used are not adequate. Thousands of microscopic cracks are created by injecting a 300-pound jet of air via a hollow tube implanted into the earth. An oxygen-rich environment is created by allowing the drainfield to drain, which in turn encourages the growth of aerobic microorganisms. When compared to anaerobic bacteria, which do not need oxygen to survive, aerobic bacteria often reside in the drainfield’s upper 26 inches and digest waste at a much faster rate. During this procedure, no digging or damage to the yard is required.
A septic seep may unclog a clay soil that has gotten clogged owing to salt in wastewater sticking to the clay. This chemical works by releasing sodium-bonded clay from the soil and allowing air and water to flow freely again. It also has the advantage of dispersing soil-clogging greases and scums.

Leave a Reply

Your email address will not be published. Required fields are marked *